Method for Cleaning Dirty and Embedded Oven Racks Revealed! – Page 2

Ingredients and Materials

Before we dive into the process, make sure you have all the materials ready:

A Large Tub or Bathtub: To soak the racks, you’ll need a container large enough to submerge them.
Dish Soap: Choose a degreasing dish soap for the best results.
Baking Soda: Known for its abrasive qualities, baking soda will help remove tough stains.
Vinegar: The acidity in vinegar aids in breaking down grease.
Scouring Pad or Sponge: Opt for a sponge with a gentle abrasive side.
Old Towel or Soft Cloth: Use this to dry your racks once cleaned.
Gloves: To protect your hands from the chemicals and hot water.

Follow these steps carefully to achieve spotless oven racks.

Remove the Racks from the Oven: Make sure the oven is turned off and the racks are cool to the touch before removing them. Lay an old towel in the tub or bathtub to protect both the racks and the surface of the tub.
Fill the Tub with Hot Water: The water should be hot enough to help loosen grease and grime. Aim for a level high enough to submerge the racks fully.

Pour Dish Soap into the Water: Add a generous amount of dish soap, preferably one that is effective at cutting grease.
Sprinkle Baking Soda Over the Racks: Evenly distribute the baking soda across the racks. Baking soda is highly effective for removing sticky residue and eliminating odors.

Let the Racks Soak: Allow the racks to sit in the solution for at least 4-6 hours. For heavily embedded grease, it’s best to let them soak overnight.
Agitate the Water: Occasionally, move the racks slightly to help distribute the cleaning solution. This will help dissolve tougher grime.

Use a Scouring Pad or Sponge: After the soak, use a sponge or scouring pad to scrub the racks. You’ll notice that the grease and grime come off more easily.
Apply More Baking Soda if Necessary: For any remaining tough spots, sprinkle more baking soda directly on the scouring pad or sponge, then scrub until clean.

Spray or Pour Vinegar on the Racks: Pour a small amount of vinegar over the racks or apply with a sponge. The vinegar reacts with any leftover baking soda, creating a fizzy reaction that lifts any remaining dirt and residue.
Rinse Thoroughly with Hot Water: Once the fizzing has subsided, rinse the racks under hot water. Ensure all baking soda and vinegar residue is gone.

Pat the Racks Dry: Use an old towel or soft cloth to remove excess water from the racks.
Let Them Air Dry: For best results, leave the racks to air dry for a few minutes before reinstalling them in the oven.
Reinstall the Racks: Carefully slide the racks back into the oven, ensuring they’re properly aligned.

Please Head Over To Next Page There Still More ,,,